I needed a second screen for my netbook, as the screen real estate was not large enough for working with QT creator comfortably. I did not want (and did not have) a 5 meter VGA cable crossing the living room, but I wanted to use my TV as the second monitor.
I grabbed my Raspberry Pi B, a 2GB SD-card i had in the spares, and set out to configure the Raspberry Pi to mirror the screen on the TV from the network.
I tried using a protocol of X, called XDMX, that is designed to do what I wanted. I used much time, and had inconsistent results. I am sure that the problems where all of the wetware kind, but the documentation seems really sparse, and that does not help.
The solution for now, is less elegant. I installed a basic LXDE environment on the Raspberry Pi. Shared the keyboard and mouse using Synergy, and run the X applications on the netbook, through a ssh tunnel from the Raspberry Pi.
First things first, an OS (Raspberry Pi).
The standard Raspbian image will not fit on the 2GB card I had, but The minimal Raspbian unattended netinstaller comes to the rescue.
Simply download the installer image, write it to the SD-card, and boot the Pi, with it. Instructions for doing this can be found in the README. ua-netinst will start installing a Raspbian system, from the Internet, this takes a while.
I then lost my whits and asked the Pi to install a full lxde environment, it took ages! After starting from scratch, I added myself as a user, and installed X and a minimal LXDE environment.
adduser username apt-get install keyboard-configuration apt-get install xserver-xorg apt-get install lxde-core apt-get install xinit
apt-get install synergy
Synergy (control node).
Synergy acting as a server, needs a configuration file in
to setup the layout.
I have the Raspberry Pi (connected to the TV) with the host name
and the netbook called
ace2 (the alias section). The TV is left of the
section: screens pi: netbook: end section: links pi: left = netbook netbook: right = pi end section: aliases netbook: ace2 end
Start the Synergy server.
Final step (Raspberry Pi).
I needed to run QT creator on the TV, but you can run any X application. Complex things like video and fancy GUIS, are slow. Probably due to missing hardware acceleration and network speed.
I start the Synergy client, after which the netbook mouse and keyboard works on the Pi as well.
synergy (IP address of the controlling computer)
Then I ssh into the the netbook with X tunneling and compression, and start the program that I want to use. I now have the program (qtcreator) running on the TV, but can use the netbook keyboard and mouse to control it.
ssh -CX (IP address of the controlling computer) qtcreator
Generated on 2018-05-03 01:14:21.894661